Bolin R9-230NX – NDI indoor PTZ camera, Full HD, 30x zoom, black
GTIN: 6973775121895
Full HD 1080p60 NDI HX3 PTZ camera with Sony 1/1.8-type STARVIS 2 sensor, 30x optical zoom, dual 3G-SDI, HDMI, optical SDI slot and NDI/IP streaming, Genlock, XLR audio, FreeD, PoE++. Colour: black.
Bolin R9-230NX FHD NDI HX3 PTZ Camera
The Bolin R9-230NX is a Full HD PTZ camera of the R9 series with Certified NDI HX3: video travels over the IP network, simplifying cabling and distribution, and is fully compatible with NDI-enabled hardware and software. A full Sony image block with a 1/1.8-type STARVIS 2 sensor and 30x high-resolution optical zoom delivers accurate colours and sharp detail even in very low light, while Super/Super+ image stabilization keeps shots steady. NDI HX3 with embedded NDI Bridge, RTSP, RTMP and SRT streaming run alongside dual 3G-SDI, HDMI and an SFP optical SDI slot, for hybrid IP and baseband productions. Genlock, balanced XLR audio inputs and FreeD tracking for AR/VR complete the broadcast feature set. Designed for indoor installation in studios, live events, houses of worship and professional AV, with a built-in handle and single-cable PoE++ power.
Key features
- Sony image block with 1/1.8-type STARVIS 2 sensor and 30x optical zoom, Full HD 1080p60
- Extreme low-light performance down to 0.009 lx, colour even with ICR on
- Super/Super+ image stabilizer for vibrating environments
- Sony AF that can zoom and focus at the same time, with spot focus, spot AE and spot AWB
- Certified NDI HX3 with embedded NDI Bridge, NDI 6 ready, NDI control
- Simultaneous dual 3G-SDI, HDMI, optical SDI and NDI/IP outputs with independent formats
- Genlock input (black burst and tri-level) for multi-camera synchronization
- Balanced XLR audio input with 48 V phantom power via LEMO breakout cable
- FreeD protocol for AR/VR camera tracking
- On-screen character generator and logo insertion
- Built-in carrying handle, front and rear tally lights, secure HDMI cable mount
- Single network cable for video, control and PoE++ power, or 12 V DC with locking connector
- IEC 60601 certified for medical environments; NDAA compliant
Specifications
- Image sensor: Sony 1/1.8-type CMOS STARVIS 2, 2712 x 1538 effective pixels (4.17 MP)
- Optical zoom: 30x (digital zoom 12x)
- Focal length: 6.5-162.5 mm
- Aperture: F1.6 (wide) to F4.8 (tele)
- Angle of view: 58.1° to 2.3° horizontal, 34.9° to 1.7° vertical
- Minimum object distance: 100 mm (wide), 1200 mm (tele)
- Minimum illumination (1/30 s, high sensitivity on): 0.009 lx ICR off, 0.00008 lx ICR on
- Shutter speed: 1/1 to 1/10,000 s
- Image: Super/Super+ image stabilizer, WDR, visibility enhancer, HLC, defog, colour matrix, 2D/3D noise reduction, low latency mode
- HDMI output: HDMI 1.4 Type A, 12-bit 4:2:2
- SDI outputs: 2 x 3G-SDI on 75 Ω BNC (clean and with OSD), 10-bit 4:2:2, SMPTE 292M/296M/424M/274M/425-A with SMPTE 352 metadata
- HDMI/SDI formats: 1080p 60/59.94/50/30/29.97/25/24/23.98, 1080i 60/59.94/50, 720p 60/59.94/50
- IP video: NDI HX3, H.264/H.265, MJPEG; 1080p 60/59.94/50/30/29.97/25, 720p 60/59.94/50; 2 streams
- Streaming protocols: NDI HX3, RTMP(S), RTSP (with encryption), SRT, MPEG-TS over UDP/RTP; ONVIF 2.4 (Profile S)
- Bandwidth: 1-100 Mbps; NDI latency under 120 ms
- Control: RS422 (RJ45), IP, IR remote; VISCA, Pelco P/D, VISCA over IP, ONVIF, NDI, FreeD
- Pan: 340° (-170° to +170°), 0.05° to 70°/s; tilt: 120° (-30° to +90°), 0.05° to 60°/s, speed proportional to zoom
- Presets: 255, speed 70°/s, accuracy 0.1°; picture profile presets, motionless preset, 4 PTZ trace memories
- Optical SDI: SFP slot up to 12G-SDI, duplex LC (SFP module not included)
- Sync: Genlock input on BNC, black burst and tri-level sync
- Audio input: balanced XLR via 10-pin LEMO to XLR breakout cable (optional BLA-10), 48 V phantom power; audio embedded in HDMI, SDI and IP
- Network: RJ45, 10/100/1000 Mbps Ethernet for IP control, video, audio and firmware upgrade
- Tally light: front and rear, red and green
- Noise level: NC35
- Mounting: upright, suspended (ceiling), wall or tripod; built-in carrying handle; 1/4" safety bond point
- Operating conditions: -10 to +50 °C, humidity up to 80% (non-condensing)
- Dimensions: 201 x 253 x 249 mm (W x D x H), 256 mm high with feet pads
- Weight: 3.8 kg
- Power: 12 V DC (screw-lock connector) or PoE++ (IEEE 802.3bt Type 3 Class 5); consumption 26-31 W
- Colour: black
- Certifications: CE, FCC, IC, UKCA, RoHS, WEEE
In the box
- 1 x IR remote controller (VCC-RC-2)
- 1 x RS422/232 RJ45 adapter (VCC-CC45RS)
- 1 x 12 V 4 A locking power supply (P12-4) with US, EU and UK power cords
- 1 x Safety cable
- 1 x Protective dust cover
- 1 x Lens cap
- 1 x Mounting screw set
| Product Condition | New |
|---|---|
| Manufacturer | Bolin |
| manufacturer code | R9-230NX |
| Ean | 6973775121895 |
| Taric Code | 85258099 |





