Bolin R9-418N – NDI indoor PTZ camera, 4K, 18x zoom, black
GTIN: 6973775121901
4K30 / 1080p60 NDI PTZ camera with NDI High Bandwidth and NDI HX3, Sony 1-inch sensor, Zeiss 18x zoom lens, dual 6G-SDI, HDMI, optical SDI slot, Genlock, XLR audio, FreeD, PoE++. Colour: black.
Bolin R9-418N 1-Inch 4K High Bandwidth NDI PTZ Camera
The Bolin R9-418N is a 4K PTZ camera of the R9 series with full NDI High Bandwidth as well as NDI HX3: video travels over the IP network, simplifying cabling and distribution, and is fully compatible with NDI-enabled hardware and software. Its Sony 4K image block with a 1.0-type Exmor R sensor gives clean, low-noise images with good dynamic range, combined with a Zeiss Vario-Sonnar T lens offering 18x zoom in 4K and 24x in Full HD, F2.8 at the wide end and optical image stabilization. NDI, with embedded NDI Bridge, runs alongside dual 6G-SDI, HDMI and an SFP optical SDI slot in 4K30 or Full HD 1080p60. Genlock, balanced XLR audio inputs and FreeD tracking for AR/VR complete the broadcast feature set. Designed for indoor installation, with a built-in handle and single-cable PoE++ power.
Key features
- Sony image block with 1-inch Exmor R 4K sensor, 4K30 and Full HD 1080p60
- Zeiss Vario-Sonnar T lens, 18x zoom in 4K and 24x in Full HD, F2.8 at the wide end
- Optical image stabilizer and built-in ND filter
- Black level, black gamma and colour matrix controls, 23.98p/24p cinematic modes
- NDI High Bandwidth and NDI HX3, NDI certified, NDI 6 ready, embedded NDI Bridge, NDI control
- Simultaneous dual 6G-SDI, HDMI, optical SDI and NDI/IP outputs with independent formats
- Genlock input (black burst and tri-level) for multi-camera synchronization
- Balanced XLR audio input with 48 V phantom power via LEMO breakout cable
- FreeD protocol for AR/VR camera tracking
- On-screen character generator and logo insertion
- Built-in carrying handle, front and rear tally lights, secure HDMI cable mount
- Single network cable for video, control and PoE++ power, or 12 V DC with locking connector
- IEC 60601 certified for medical environments; NDAA compliant
Specifications
- Image sensor: Sony 1.0-type back-illuminated Exmor R CMOS, 14.2 MP; output 3840 x 2160
- Lens: Zeiss Vario-Sonnar T, 18x optical zoom in 4K, 24x in Full HD
- Focal length: 9.3-111.6 mm
- Aperture: F2.8 (wide) to F4.5 (tele)
- Angle of view: 64.6° to 6.1° horizontal, 39.2° to 3.4° vertical
- Minimum object distance: 80 mm (wide), 1000 mm (tele)
- Minimum illumination (1/30 s): 0.5 lx with high sensitivity on, 2.0 lx off
- Shutter speed: 1/1 to 1/10,000 s
- Image: optical image stabilizer, ND filter, WDR 130 dB (visibility enhancer), black level, black gamma, gamma level, colour matrix, 2D/3D noise reduction
- HDMI output: HDMI Type A, 12-bit 4:2:2
- SDI outputs: 2 x 6G-SDI on 75 Ω BNC (clean and with OSD), 10-bit 4:2:2, SMPTE 292M/296M/424M/274M/425-A/2081 with SMPTE 352 metadata
- HDMI/SDI/IP formats: 2160p 30/29.97/25/24/23.98, 1080p 60/59.94/50/30/29.97/25/24/23.98, 1080i 60/59.94/50, 720p 60/59.94/50
- IP video: NDI High Bandwidth, NDI HX3, H.264/H.265/MJPEG by FPGA, up to 2160p30 and 1080p60; 2 streams
- Streaming protocols: NDI, NDI 6, RTMP(S), RTSP (with encryption), RTP unicast/multicast, SRT, MPEG-TS over UDP/RTP; ONVIF 2.4 (Profile S)
- Bandwidth: NDI High Bandwidth 5-360 Mbps, NDI HX3 128 kbps to 100 Mbps; NDI latency under 100 ms
- Control: RS422 (RJ45), IP, IR remote; VISCA, Pelco P/D, VISCA over IP, ONVIF, NDI, FreeD, API
- Pan: 340° (-170° to +170°), 0.05° to 70°/s; tilt: 120° (-30° to +90°), 0.05° to 60°/s, speed proportional to zoom
- Presets: 255, speed 70°/s, accuracy 0.1°; picture profile presets, motionless preset, 4 PTZ trace memories
- Optical SDI: SFP slot up to 12G-SDI, duplex LC (SFP module not included)
- Sync: Genlock input on BNC, black burst and tri-level sync
- Audio input: balanced XLR via 10-pin LEMO to XLR breakout cable (optional BLA-10), 48 V phantom power; audio embedded in HDMI, SDI and IP
- Network: RJ45, 10/100/1000 Mbps Ethernet for IP control, video, audio and firmware upgrade
- Tally light: front and rear, red and green
- Noise level: NC35
- Mounting: upright, suspended (ceiling), wall or tripod; built-in carrying handle; 1/4" safety bond point
- Operating conditions: -10 to +50 °C, humidity up to 80% (non-condensing)
- Dimensions: 201 x 253 x 249 mm (W x D x H), 256 mm high with feet pads
- Weight: 3.8 kg
- Power: 12 V DC (screw-lock connector) or PoE++ (IEEE 802.3bt Type 4 Class 7); consumption 40-46 W
- Colour: black
- Certifications: CE, FCC, IC, UKCA, RoHS, WEEE
In the box
- 1 x IR remote controller (VCC-RC-2)
- 1 x RS422/232 RJ45 adapter (VCC-CC45RS)
- 1 x 12 V 4 A locking power supply (P12-4) with US, EU and UK power cords
- 1 x Safety cable
- 1 x Protective dust cover
- 1 x Lens cap
- 1 x Mounting screw set
| Product Condition | New |
|---|---|
| Manufacturer | Bolin |
| manufacturer code | R9-418N |
| Ean | 6973775121901 |
| Taric Code | 85258099 |





