Cranborne Audio N22H
GTIN: 5060619260054
Reference headphone amplifier with Cat 5 snake and C.A.S.T. breakout box: 2 combo inputs, 2 XLR/jack outputs, up to 950 mW per channel, powered by 9 V supply or 9 V battery.
Cranborne Audio N22H Headphone Amplifier, Cat 5 Snake and C.A.S.T. Breakout Box
The Cranborne Audio N22H combines all the C.A.S.T. functions of the N22 with a reference-grade headphone amplifier derived from the 500R8. It has two balanced combo inputs and two balanced outputs on XLR and 1/4" jack, and carries audio to and from 500R8, 500ADAT, N22 or another N22H over shielded Cat 5e/6/7 cable up to 100 m, so headphone amplification can be placed right next to the musician.
The amplifier has a flat response from below 0.8 Hz to over 200 kHz, very low distortion and up to 950 mW per channel into 100 Ohm. High Power mode suits high-impedance, open-back mixing and mastering headphones, while Low Power mode maximises battery life with in-ear and closed-back tracking headphones. It runs from the included 9 V DC supply or from a 9 V battery. The rugged metal enclosure has fixing holes, cable-tie points, non-slip feet and a 3/8" mic stand thread.
Key features
- Two balanced combo jack inputs, two balanced XLR and 1/4" jack outputs
- Reference headphone amplifier: THD+N < 0.0009% (+6 dBu, 1 kHz, 100 kOhm load)
- Switchable High and Low Power modes
- 9 V battery compartment: up to about 10 hours (Low Power) or 2 hours (High Power)
- 9 V DC inlet (centre negative), power supply included
- C.A.S.T. IN and C.A.S.T. OUT ports
- Cat 5 snake with N22 or a second N22H, up to 100 m over shielded Cat 5e/6/7
- Rugged metal enclosure with fixing holes and cable-tie holes
- Non-slip rubber feet, 3/8" mic stand thread on the bottom
Compatibility
- Cranborne Audio 500R8, 500ADAT, N22, N22H, Camden EC2, N8
Specifications
- Output power (High Power): 2 x 252 mW at 600 Ohm, 2 x 950 mW at 100 Ohm, 2 x 470 mW at 32 Ohm
- Frequency response: -1 dB, < 0.8 Hz to > 250 kHz
- Output impedance: 0.33 Ohm (High Power)
- Input impedance: 44 kOhm
- Dimensions: 150 x 46 x 120 mm
- Weight: 0.91 kg
| Product Condition | New |
|---|---|
| Manufacturer | Cranborne Audio |
| manufacturer code | CA-N22H |
| Ean | 5060619260054 |




