IGS Audio Multicore Multiband VCA Compressor
Stereo three-band analogue VCA compressor with adjustable active crossover (6 dB/oct), full controls and Mute/On/Bypass per band, UTM transformer-balanced I/O, for mix bus, mastering and de-essing.
IGS Audio Multicore Multiband VCA Compressor
The IGS Audio Multicore is a multiband compressor with three bands of classic analogue VCA compression, usable on the mix bus, for mastering or on single sources: on vocals, for example, it can control sibilants without affecting the dynamics of the low band.
The core of the unit is an adjustable three-band active crossover that splits the signal into low, mid and high bands with a gentle 6 dB/octave slope, allowing musical control of each band without phase problems. Each band has its own compressor with threshold, ratio, attack, release and gain controls, plus a Mute/On/Bypass switch: muting two bands lets you listen to the third alone. Inputs and outputs are transformer balanced (UTM Industry), the signal path uses only through-hole components, and passive parts are matched between the channels for accurate left/right correlation.
Key features
- Three bands of analogue VCA compression
- Adjustable active crossover, 6 dB/octave
- Threshold, ratio, attack, release and gain per band
- Mute/On/Bypass switch per band for solo listening
- Transformer-balanced inputs and outputs (UTM Industry)
- Through-hole components, matched between channels
Specifications
- Input impedance: 10 kOhm, transformer
- Output impedance: 600 Ohm, transformer
- Operating level: +4 dBu
- Max input/output level: +28 dBu
- Dynamic range: 104 dB(A)
- Max gain reduction: 20 dB
- Ratio: 2:1, 4:1, 10:1
- Release: 0.1, 0.4, 0.6, 0.8, 1.6 s, auto
- Frequency response: 10 Hz - 30 kHz (±0.3 dB)
- Signal-to-noise ratio: 90 dB(A)
- THD+N: 0.08%
- Crosstalk: 88 dB
- Power: 115/230 V selectable, 22 W
| Product Condition | New |
|---|---|
| Manufacturer | Igs |
| manufacturer code | IGSMUMU |
