Igs DTL Double Triode Limiter
Two-channel tube microphone preamp with opto-limiter based on 60s/70s designs, Hi-Z instrument inputs, +48 V, -20 dB pad, phase switch, Carnhill and Edcor transformers and up to 60 dB gain.
Commercial guarantee of durability offered by the producer at no extra cost: 3 years. See the GARAN label
IGS Audio DTL Double Triode Limiter Tube Preamp
The IGS Audio Double Triode Limiter (DTL) is a classic tube triode microphone preamp upgraded with a musical opto-limiter based on circuits of the 1960s and 70s. Its wide gain range makes it suitable for anything from drums to the quietest ribbon microphone, and it also works well for recording synthesizers and drum machines or for re-amping tracks from the DAW, adding a pleasant tube saturation. The front-panel Hi-Z inputs feed an electric or bass guitar directly into the grid of the first tube stage.
The audio path is a two-stage tube amplifier with individual drive on both stages: the first depends on the input level (with -20 dB pad), the second on the output control. The limiter uses an IGS custom photocell, with a front-panel Limit LED, and can tame peaks before the converter or serve as a drum or mix bus compressor. Inputs and outputs are balanced with Carnhill and Edcor transformers, and the anode voltage is close to 300 V DC. Output and limiter threshold are adjustable per channel; switches include gain, +48 V, Mic/Hi-Z, phase and -20 dB pad, and the meters show the output level.
Key features
- Two-stage tube microphone preamp with individual drive
- Opto-limiter with IGS custom photocell
- Front-panel Hi-Z inputs into the first tube stage
- Switches: gain, +48 V phantom, Mic/Hi-Z, phase, -20 dB pad
- Carnhill input and Edcor output transformers
- Output level meters
Specifications
- Input impedance: 300 Ohm (Carnhill transformer), 1 MOhm Hi-Z
- Output impedance: 600 Ohm, Edcor transformer
- Operating level: +4 dBu
- Max output level: +22 dBu
- Max gain: 60 dB
- Max gain reduction: 18 dB
- Frequency response: 20 Hz - 20 kHz, ±0.3 dB
- THD+N: < 0.1%
- Tubes: 6N1P, 6N2P
- Power supply: internal, 115/230 V AC, 50-60 Hz, 40 W
| Product Condition | New |
|---|---|
| Manufacturer | Igs |
| manufacturer code | IGSDTL |
