sE Electronics X1 S Condenser Microphone
GTIN: 0819032011188
Cardioid studio condenser microphone with hand-crafted 1" true condenser capsule, up to 160 dB SPL, 9 dB self-noise, -10/-20 dB pads and 80/160 Hz low-cut filters, for vocals, drums, guitars, piano and orchestral instruments.
Warranty extendable free of charge to 3 years by registering the product with the manufacturer (registering the product on the sE Electronics website (seelectronics.com/register-a-product); purchase from an authorized dealer). Register the product
sE Electronics X1 S Condenser Microphone
The sE Electronics X1 S is a refined version of sE's best-selling X1 condenser microphone. It uses a hand-made 1" true condenser capsule with gold-sputtered diaphragm, constructed and individually tuned in sE's own capsule room, with a cardioid polar pattern.
The redesigned electronics give improved sensitivity, a self-noise of only 9 dB and SPL handling of up to 160 dB, for the highest dynamic range in its class. Two pad settings (-10 and -20 dB) allow close miking of very loud sources, and two low-cut filters (80 or 160 Hz) remove rumble and footfall noise and compensate for proximity effect. The all-metal housing rejects electrical interference and the XLR connector is gold-plated. It suits vocals, drum kit, overheads and room, acoustic guitar, guitar cabinets, piano, strings, woodwind and brass.
Key features
- Hand-crafted 1" true condenser capsule, individually tuned
- Cardioid polar pattern
- Max SPL up to 160 dB with pad, self-noise 9 dB
- Switchable -10 / -20 dB attenuation pads
- Switchable 80 / 160 Hz low-cut filters
- All-metal housing and gold-plated XLR connector
Specifications
- Capsule: hand-crafted 1" true condenser
- Polar pattern: cardioid
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 30 mV/Pa (-31 dBV)
- Max SPL: 140 / 150 / 160 dB (0 / 10 / 20 dB pad, 0.5% THD @ 1 kHz)
- Equivalent noise level: 9 dB
- Dynamic range: 131 / 141 / 151 dB (0 / 10 / 20 dB pad)
- Signal-to-noise ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/oct, switchable
- Attenuation pad: 10 / 20 dB, switchable
- Electrical impedance: 125 ohms
- Recommended load impedance: >1 kohm
- Powering: 48 V phantom power (P48, IEC 61938)
- Current consumption: 6.0 mA
- Connector: 3-pin male XLR
- Dimensions: 58 mm diameter x 169 mm length
- Weight: 445 g
In the box
- 1 x X1 S microphone
- 1 x Microphone stand clip
- 1 x Thread adapter
| Product Condition | New |
|---|---|
| Manufacturer | Se Electronics |
| manufacturer code | SEX1S |
| Ean | 0819032011188 |
| Modified on | 09-09-2020 |
| Product title | sE Electronics X1 S Black Studio microphone |
| Long Product Name | 20 Hz - 20 kHz, 30 mV/Pa (-30.5 dBV), Hand-Crafted 1" True Condenser, Cardioid, 85 dB (SNR), 125 Ohms, XLR (3-pin), 445 g |
| Product specifications | MicrophoneMicrophone sensitivity -30.5 dB Microphone frequency 20 - 20000 Hz Type* Studio microphone Microphone input impedance 125 Ω Recommended load impedance 1000 Ω Sensitivity (1kHz) 30 mV/Pa Microphone dynamic range 151 dB Equivalent noise level 9 dB Microphone Signal-to-Noise Ratio (SNR) 85 dB Microphone direction type Cardioid Voice coil type Condenser Low-cut filter 160 Hz Attenuation pad 20 dB Ports & interfacesConnectivity technology* Wired Ports & interfacesDevice interface* XLR-3 PerformanceProduct colour* Black Certification IEC 61938 PowerOperating voltage 48 V Power consumption 6 mA Weight & dimensionsHeight 169 mm Diameter 5.8 cm Microphone weight 445 g Packaging contentNumber of products included 1 pc(s) |








