sE Electronics X1 S Condenser Microphone Studio Bundle
GTIN: 0819032011195
Recording bundle with the X1 S cardioid condenser microphone, RF-X Reflexion Filter, microphone cable, shock mount and pop filter.
Warranty extendable free of charge to 3 years by registering the product with the manufacturer (registering the product on the sE Electronics website (seelectronics.com/register-a-product); purchase from an authorized dealer). Register the product
sE Electronics X1 S Studio Bundle
The sE Electronics X1 S is an entry-level cardioid condenser microphone from the sE X1 series, for recording vocals and instruments.
The Studio Bundle combines the microphone with an sE RF-X Reflexion Filter to reduce room sound, a shock mount, a pop filter and a microphone cable, for a complete vocal recording setup.
Specifications
- Capsule: hand-crafted 1" true condenser
- Polar pattern: cardioid
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 30 mV/Pa (-31 dBV)
- Max SPL: 140 / 150 / 160 dB (0 / 10 / 20 dB pad, 0.5% THD @ 1 kHz)
- Equivalent noise level: 9 dB
- Dynamic range: 131 / 141 / 151 dB (0 / 10 / 20 dB pad)
- Signal-to-noise ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/oct, switchable
- Attenuation pad: 10 / 20 dB, switchable
- Electrical impedance: 125 ohms
- Recommended load impedance: >1 kohm
- Powering: 48 V phantom power (P48, IEC 61938)
- Current consumption: 6.0 mA
- Connector: 3-pin male XLR
- Dimensions: 58 mm diameter x 169 mm length
- Weight: 445 g
In the box
- 1 x X1 S microphone
- 1 x sE ISO PACK (quick-lock shock mount and metal pop filter)
- 1 x RF-X Reflexion Filter
- 1 x 3 m microphone cable
| Product Condition | New |
|---|---|
| Manufacturer | Se Electronics |
| manufacturer code | SEX1SS |
| Ean | 0819032011195 |
| Modified on | 09-09-2020 |
| Product title | sE Electronics X1 S Studio Bundle Black Studio microphone |
| Long Product Name | X1 S Studio Bundle, X1 S microphone, RF-X Reflexion Filter, Isolation Pack (with pop shield), 3-meter mic cable |
| Product specifications | MicrophoneMicrophone sensitivity -30.5 dB Microphone frequency 20 - 20000 Hz Type* Studio microphone Microphone input impedance 125 Ω Recommended load impedance 1000 Ω Sensitivity (1kHz) 30 mV/Pa Microphone dynamic range 151 dB Equivalent noise level 9 dB Microphone Signal-to-Noise Ratio (SNR) 85 dB Microphone direction type Cardioid Voice coil type Condenser Low-cut filter 160 Hz Attenuation pad 20 dB Ports & interfacesConnectivity technology* Wired Device interface* XLR-3 PerformanceProduct colour* Black Certification IEC 61938 PowerOperating voltage 48 V Power consumption 6 mA Weight & dimensionsHeight 169 mm Diameter 5.8 cm Microphone weight 445 g Packaging contentNumber of products included 1 pc(s) Cables included XLR Packaging content RF-X Reflexion Filter, Isolation Pack (with pop shield), 3-meter mic cable |
Write Your Own Review






