SKAARHOJ XC7 IP joystick panel with Hall Effect joystick and UniSketch

SKAARHOJ XC7 with UniSketch and Hall Effect Joystick

SKAARHOJ XC7 with Hall Effect joystick is a compact universal IP-based joystick panel designed to add joystick control to existing setups. Its 3-axis Hall Effect joystick with reset button offers enhanced precision and durability for pan, tilt and zoom control, and its minimalist design makes it a companion for other SKAARHOJ controllers, for example as an additional joystick next to a PTZ Extreme.

This version runs on the SKAARHOJ UniSketch platform with Raw Panel Server mode and is connected via 100 Mbit Ethernet with PoE.

Key features

• 3-axis precision Hall Effect joystick
• Designed to complement other SKAARHOJ controllers
• 100 Mbit Ethernet with Power over Ethernet (PoE IEEE802.3af)
• UniSketch platform with Raw Panel Server mode
• Designed and made in Denmark

Compatibility

• Other SKAARHOJ controllers (for example as an extra joystick next to PTZ Extreme)

Notes

• Version with Hall Effect joystick instead of the standard joystick of the XC7.
• XC7 V3 with UniSketch platform; the current SKAARHOJ shop version (XC7-V4) uses Link IO. Images show the current model.
• Ethernet cable not included: SKAARHOJ recommends Cat 6 S/FTP or better.

In the box

• Controller
• 12V power supply (PHIHONG PSA15R-120P, 12V/1.25A, 1.5 m cable, EU/GB/US/AU plug depending on the destination country)
• Micro USB cable
• Getting Started Guide

Specifications

• Joystick: 3-axis Hall Effect (left-right, up-down, rotate) with top button
• Networking: 100 Mbit Ethernet with Power over Ethernet (PoE IEEE802.3af)
• Power: 12V DC jack (5.5 x 2.1 x 10 mm, centre positive) or PoE IEEE802.3af/t
• Service port: Micro USB for firmware updates and setting a manual IP address
• Platform: UniSketch (Raw Panel Server, legacy Device Cores)
• Weight: 572 g
• Dimensions (technical drawing): 88 mm wide, 178 mm deep, height 46 to 72 mm
• Country of origin: Denmark