Cranborne Audio Camden EC1
GTIN: 5060619260108
Half-rack 1U discrete mic/line/Hi-Z preamp with Mojo saturation, 48 V status LED, -10 dB pad, headphone mixer with reference amplifier and C.A.S.T. output for 500R8/500ADAT.
Cranborne Audio Camden EC1 Preamp, Signal Processor and Headphone Amplifier
The Cranborne Audio Camden EC1 brings the Camden preamp from the Camden 500 into a compact half-rack desktop unit, to upgrade the front end of any audio interface. The discrete mic/line/Hi-Z preamp offers very low noise and distortion, and the Mojo circuit adds analogue saturation in two styles, Thump and Cream. A 48 V status LED shows when phantom power is charging or discharging, protecting ribbon microphones.
A headphone mixer blends the preamp, an external input and the aux input with independent levels, so the preamp can be monitored directly during mic placement, zero-latency artist mixes can be created, or the reference headphone amplifier can be used for critical listening. Outputs on balanced XLR and 1/4" jack, a -10 dB pad, a link output for instrument DI and a C.A.S.T. output to send the signal to a 500R8 or 500ADAT over one Cat 5e/6/7 cable complete the unit.
Key features
- Discrete Camden mic/line/Hi-Z preamp
- EIN < -129.5 dBu, THD+N < 0.00025% (1 kHz, 35 dB gain, +24 dBu out)
- 48 V status LED: orange while charging/discharging, red when ready
- Mojo analogue saturation circuit with variable control, true bypass and two styles: Thump (boosts low-order harmonics from 160 Hz down to 20 Hz and below) and Cream (odd/even harmonics with transformer-style transient taming)
- Headphone mixer with independent channel, external input and aux input levels
- Reference headphone amplifier: output impedance 0.33 Ohm, response ±1 dB from < 1 Hz to > 100 kHz
- Balanced XLR and impedance-balanced 1/4" jack outputs, -10 dB output pad
- Impedance-balanced 1/4" link output for instrument DI and signal splitting
- C.A.S.T. OUT port to 500R8/500ADAT via a single shielded Cat 5e/6/7 cable
- External 24 V, 1.25 A power supply with latching connector
Compatibility
- Rack mounting with the Cranborne Audio Half Rack Kit
Specifications
- Preamps: 1 discrete mic/line/Hi-Z Camden preamp with Mojo saturation (Thump and Cream), 48 V with status LED, 80 Hz high-pass filter (-3 dB, 12 dB/oct)
- Input impedance: mic 8.9 kΩ (48 V off) / 5.4 kΩ (48 V on); line 24.3 kΩ; Hi-Z 1.5 MΩ unbalanced, 3 MΩ balanced
- Max input level: mic +17.6 dBu, line +26.5 dBu, Hi-Z +24 dBu
- Gain: mic 8-68 dB, line 0-60 dB, Hi-Z 3-63 dB
- EIN: <-129.5 dBu (150 Ω, unweighted), <-131 dBu (150 Ω, A-weighted), <-135.5 dBu (inputs common)
- Frequency response: ±0.7 dB <1 Hz to >1000 kHz (35 dB gain); ±1 dB <5 Hz to >200 kHz (max gain)
- THD+N: <0.00025% (1 kHz, 35 dB gain, +24 dBu out); IMD <0.0006% (+20 dBu out)
- Phase shift: <2.75° (20 Hz - 20 kHz, 40 dB gain), <6° at max gain; CMRR >70 dB (typ. >85 dB); slew rate 20 V/µs
- Outputs: balanced XLR max +27.5 dBu, 150 Ω; impedance balanced 1/4 inch jack max +21.5 dBu, 150 Ω balanced / 75 Ω unbalanced; -10 dB pad
- Link output: impedance balanced 1/4 inch jack, buffered, max +21.8 dBu
- C.A.S.T. OUT port for 500R8 / 500ADAT over shielded Cat 5e/6/7 cable
- Headphone amplifier: frequency response -1 dB <1 Hz to >70 kHz; THD <0.0006% and THD+N <0.00085% at +20 dBu, 1 kHz, 300 Ω; output impedance 0.33 Ω; 250 mW x 2 at 600 Ω, 650 mW x 2 at 220 Ω, 1.21 W x 2 at 100 Ω, 500 mW x 2 at 32 Ω; dynamic range 114.5 dB (A)
- Power: external 24 V 1.25 A DC supply (30 W) with latching connector, 100-240 V AC
- Operating temperature: +1 to 35 °C; storage -20 to 50 °C
- Dimensions: 220 x 44.45 x 240 mm (1U, rackmount kit available)
- Weight: 1.8 kg
| Product Condition | New |
|---|---|
| Manufacturer | Cranborne Audio |
| manufacturer code | CA-CAMDENEC1 |
| Ean | 5060619260108 |




