Cranborne Audio Camden EC2
GTIN: 5060619260085
19" 1U two-channel discrete mic/line/Hi-Z preamp with two Mojo saturation circuits, two headphone mixers with reference amplifiers and C.A.S.T. IN/OUT ports for Cat 5 audio distribution.
Cranborne Audio Camden EC2 Two-Channel Preamp, Signal Processor and Dual Headphone Mixer
The Cranborne Audio Camden EC2 is a 1U rack unit with two discrete Camden mic/line/Hi-Z preamps, the same topology used in the Camden 500, offering very low noise and distortion at every gain setting. Each channel has its own Mojo saturation circuit with Thump and Cream styles, and a 48 V status LED protects ribbon microphones during phantom power charging and discharging.
Two independent headphone mixers blend channel 1, channel 2 and the aux input, with a stereo switch to pan the two channels left and right, for preamp monitoring, zero-latency artist mixes or critical listening on the reference headphone amplifiers. A C.A.S.T. OUT port sends both preamps to a 500R8 or 500ADAT, while a C.A.S.T. IN port receives two mic/line signals from an N22 or N22H breakout box in another room, all over single shielded Cat 5e/6/7 cables.
Key features
- Two discrete Camden mic/line/Hi-Z preamps
- EIN < -129.5 dBu, THD+N < 0.00025% (1 kHz, 35 dB gain, +24 dBu out)
- 48 V status LED: orange while charging/discharging, red when ready
- Two Mojo analogue saturation circuits with variable control, true bypass and two styles: Thump (boosts low-order harmonics from 160 Hz down to 20 Hz and below) and Cream (odd/even harmonics with transformer-style transient taming)
- Two headphone mixers with independent CH 1, CH 2 and aux input levels, stereo switch
- Two reference headphone amplifiers: output impedance 0.33 Ohm
- Balanced XLR and impedance-balanced 1/4" jack outputs
- Impedance-balanced 1/4" link outputs for instrument DI and signal splitting
- C.A.S.T. OUT to 500R8/500ADAT and C.A.S.T. IN from N22/N22H via shielded Cat 5e/6/7 cable
- External 24 V, 1.25 A power supply with latching connector
Specifications
- Preamps: 2 discrete mic/line/Hi-Z Camden preamps with Mojo saturation (Thump and Cream), 48 V with status LED, 80 Hz high-pass filter (-3 dB, 12 dB/oct)
- Input impedance: mic 8.9 kΩ (48 V off) / 5.4 kΩ (48 V on); line 24.3 kΩ; Hi-Z 1.5 MΩ unbalanced, 3 MΩ balanced
- Max input level: mic +17.6 dBu, line +26.5 dBu, Hi-Z +24 dBu
- Gain: mic 8-68 dB, line 0-60 dB, Hi-Z 3-63 dB
- EIN: <-129.5 dBu (150 Ω, unweighted), <-131 dBu (150 Ω, A-weighted), <-135.5 dBu (inputs common)
- Frequency response: ±0.7 dB <1 Hz to >1000 kHz (35 dB gain); ±1 dB <5 Hz to >200 kHz (max gain)
- THD+N: <0.00025% (1 kHz, 35 dB gain, +24 dBu out); IMD <0.0006% (+20 dBu out)
- Phase shift: <2.75° (20 Hz - 20 kHz, 40 dB gain), <6° at max gain; CMRR >70 dB (typ. >85 dB); slew rate 20 V/µs
- Outputs: balanced XLR max +27.5 dBu, 150 Ω; impedance balanced 1/4 inch jack max +21.5 dBu, 150 Ω balanced / 75 Ω unbalanced
- Link output: impedance balanced 1/4 inch jack, buffered, max +21.8 dBu
- C.A.S.T. OUT port for 500R8 / 500ADAT over shielded Cat 5e/6/7 cable
- Headphone amplifier: frequency response -1 dB <1 Hz to >70 kHz; THD <0.0006% and THD+N <0.00085% at +20 dBu, 1 kHz, 300 Ω; output impedance 0.33 Ω; 250 mW x 2 at 600 Ω, 650 mW x 2 at 220 Ω, 1.21 W x 2 at 100 Ω, 500 mW x 2 at 32 Ω; dynamic range 114.5 dB (A)
- Power: external 24 V 1.25 A DC supply (30 W) with latching connector, 100-240 V AC
- Operating temperature: +1 to 35 °C; storage -20 to 50 °C
- Dimensions: 481 x 44.45 x 240 mm (19 inch rackmount, 1U)
- Weight: 2.8 kg
| Product Condition | New |
|---|---|
| Manufacturer | Cranborne Audio |
| manufacturer code | CA-CAMDENEC2 |
| Ean | 5060619260085 |



