Decimator DR1-10B1G – openGear Rear Module with 10 x BNC and RS-422/485 Connector
GTIN: 5060417390168
openGear rear module with 10 BNC connectors and a 3-pin RS-422/485 connector, required by the Decimator MC-DMON-9S and MC-DMON-QUAD multiviewer cards.
Decimator DR1-10B1G – openGear Rear Module with 10 x BNC and RS-422/485 Connector
The Decimator Design DR1-10B1G is the openGear rear module for the Decimator MC-DMON-9S and MC-DMON-QUAD multiviewer cards. It carries the 10 BNC connectors (J1 to J10) for the SDI inputs and output of the card and a 3-pin connector (J11) for RS-422/485, used for dynamic UMD and tallies with the TSL protocol.
The cards are sold without rear module, so one DR1-10B1G is needed for each MC-DMON card installed in an openGear frame.
Specifications
| Type | openGear rear module |
|---|---|
| Connectors | 10 x BNC (J1-J10); 1 x 3-pin RS-422/485 connector (J11) |
| Compatible with | Decimator MC-DMON-9S, Decimator MC-DMON-QUAD |
| Warranty | 36 months (manufacturer) |
| Code | DR1-10B1G |
| Product Condition | New |
|---|---|
| Manufacturer | Decimator Design |
| manufacturer code | DR1-10B1G |
| Ean | 5060417390168 |
| Modified on | 20-02-2019 |
| Product title | Decimator Design DR1-10B1G multi-window processor accessory |
| Long Product Name | 10x BNC and General Purpose Connector Rear |
| Product specifications | FeaturesProduct type* Rear module Product colour Red BNC connectors quantity 10 FeaturesQuantity 1 |
| Product type | Rear module |
Write Your Own Review