Novoflex Automatic Reversing Ring for Hasselblad X Mirrorless Cameras

Novoflex Automatic Reversing Adapter for Hasselblad X HAX-RETRO

For owners of Hasselblad X wide-angle or zoom lenses, the HAX-RETRO opens up extreme close-up photography. It lets you mount the lens in reverse on the camera while transferring all control functions. It is supplied with a standard 77 mm filter thread; step rings are available for other filter sizes.

Combined with the BALPRO 1 universal bellows, the HAX-RETRO turns it into fully automatic bellows for any Hasselblad X-series camera (X1D, X2D, 907X and others). Lenses can be attached to the bellows in normal or reverse position, and no separate connection rings are needed, as the V-groove for the bellows standards is present on both sides of the ring. With the Hasselblad XCD 3.5-4.5/35-75 zoom in reverse position, magnifications range from 1:2.1 at 75 mm to 1.6:1 at 35 mm.

Key features

• Reverse mounting of Hasselblad XCD lenses
• Transfers all control functions
• Turns BALPRO 1 into automatic bellows for Hasselblad X
• V-groove on both sides, no extra connection rings
• 77 mm filter thread, step rings available

Compatibility

• Camera and lens: Hasselblad X (X1D, X2D, 907X and others)
• Bellows: BALPRO 1, BALPRO T/S

Notes

• Also available as pre-configured set with BALPRO 1 (BAL-HAX)

Specifications

• Filter thread: M77 x 0.75
• Built-in aperture control: yes
• Magnification with XCD 35-75 reversed: 1:2.1 (75 mm), 1:2 (70 mm), 1:1.4 (60 mm), 1:1 (50 mm), 1.4:1 (40 mm), 1.6:1 (35 mm)