Hollyland Vcore wireless video transmitter for smartphones and tablets

Hollyland Vcore

Vcore turns smartphones and tablets into camera monitors: it connects to the HDMI output and sends the picture to the HollyView app on up to four devices, up to 100 m away. It records proxy copies for editing, transfers stills and clips instantly, also works over USB-C cable, and its built-in battery can charge the phone while monitoring. With Pyro S or Pyro H receivers it carries the signal up to 4K30.

Key features

• Monitoring on smartphones and tablets with the HollyView app (iOS and Android), up to 4 devices
• Range up to 100 m, latency up to 80 ms
• Wired monitoring up to 4K30, wireless up to 1080p60
• Proxy recording and dual backup recording to SD card (up to 1 TB)
• Instant transfer of stills and clips, sharing and streaming
• Built-in 5150 mAh battery, about 6 hours; emergency phone charging
• Compatible with Pyro receivers (up to 4K30 with Pyro S and Pyro H)

Notes

• The HDMI cable for the camera and the SD card are sold separately
• A USB data cable is required: charge-only cables do not work

Specifications

• Interfaces: HDMI IN 1.4b, USB-C (power), USB OUT 3.0, SD slot
• Resolutions: 720p50-60, 1080p23.98-60, 3840x2160p23.98-30
• Power: USB-C 5-12 V; 5150 mAh battery, about 6 hours; under 4.5 W
• Frequencies: 5.15-5.25 GHz and 5.725-5.85 GHz; latency up to 80 ms
• Dimensions: 110 x 70 x 27.2 mm; weight 220 g
• Operating temperature: -10 to 45 °C