Ikan International OTT-CONTROLLER-V2 OTTICA IP PTZ Camera Controller, Supports IP VISCA, Serial Port VISCA, PELCO-D/P

Ikan OTTICA IP PTZ Camera Controller V2 OTT-CONTROLLER-V2

The Ikan OTT-CONTROLLER-V2 is a compact PTZ controller that operates several cameras using IP or analogue control protocols. Unlike controllers limited to one protocol at a time, it mixes IP VISCA, VISCA and PELCO-D/P simultaneously, so cameras with different protocols can be operated together. It has RJ45, RS-232 (DB9), RS-422/RS-485 (terminal connector), a 12 V barrel input and a micro USB port for firmware updates.

A 2-axis joystick controls pan and tilt and a rocker controls zoom; two knobs set focus and PTZ/focus speed (7 levels), and holding the Fn button returns the camera to its default position. The large LED screen shows menus and network information, while pressing AE Mode or WB Mode assigns parameters such as focus, gain, iris, exposure compensation, shutter, red/blue gain and colour temperature to three smaller LED screens, each with its own knob. Presets are stored by holding a preset button for 2 seconds and recalled with a tap.

Key features

• IP VISCA, serial VISCA and PELCO-D/P protocols used simultaneously
• RJ45, RS-232, RS-422 and RS-485 control interfaces
• 2-axis joystick and zoom rocker
• Three knobs with dedicated LED screens for exposure and colour parameters
• 7-level pan/tilt and zoom speed
• Quick preset store and recall
• Password protection and security lock slot
• Firmware upgrade via micro USB

In the box

• 1 x PTZ controller
• 1 x Phoenix Contact 4-pin 3.81 mm terminal
• 1 x Power adapter
• 1 x User manual

Specifications

• Protocols: VISCA, IP VISCA (UDP), PELCO-D/P
• Interfaces: RJ45, RS-232 (DB9 male), RS-422/RS-485 (4-pin 3.81 mm terminal), micro USB
• Displays: 4 colour LED screens
• Joystick: 2-axis; 17 silicone buttons
• Baud rate: 2400 to 38400 bps
• Power: 12 V DC, 3.6 W max
• Operating temperature: 0 to 40 °C, indoor use
• Dimensions: 244 x 164 x 48 mm