Ikan International OTTICA-30X NDI HX PTZ Video Camera 30x Optical Zoom POE 1080/60p

Ikan OTTICA NDI|HX PTZ Video Camera 30x Optical Zoom PoE 1080/60p OTTICA-30X

The Ikan OTTICA-30X is a PTZ video camera with a 1/2.8" CMOS sensor and a 4.3-129 mm f/1.6-4.7 varifocal lens with 30x optical zoom (viewing angle 2.34° to 65.1°), recording up to 1080p at 60 fps. It supports PoE (802.3af), HDMI, 3G-SDI, Ethernet (NDI|HX), RS-232, RS-485 and audio input, with H.264/H.265 video and AAC, MP3 and G.711A audio compression.

Advanced ISP processing and H.264/H.265 encoding keep motion fluent even with limited bandwidth: a full-bandwidth NDI 1080p60 stream uses about 100 Mbps, while NDI|HX needs only around 10 Mbps. The 3G-SDI output works up to 100 m at 1080p60, autofocus is fast and stable, 2D/3D noise reduction keeps the image clean, and the step-driving motor mechanism moves the camera smoothly and quietly even at high speed. Up to 255 preset positions can be stored (10 with the IR remote), a low-power sleep mode draws less than 500 mW, and an RS-232 cascade function simplifies multi-camera installations.

The camera is controlled over IP from a web browser (pan, tilt, zoom, exposure, shutter, focus, colour temperature, presets, compression, resolution, bitrate, frame rate and more), from software such as OBS via NDI|HX, or with hardware controllers using VISCA, IP VISCA, PELCO-D, PELCO-P and ONVIF, recognised automatically. The NDI|HX licence is already included, and a wall mount for the 1/4"-20 thread on the bottom of the camera is supplied.

Key features

• 30x optical zoom, 4.3-129 mm f/1.6-4.7 lens
• NDI|HX over Ethernet with PoE (802.3af), NDI|HX licence included
• 1/2.8" CMOS sensor, 1080p up to 60 fps
• HDMI, 3G-SDI and LAN (NDI|HX) outputs, H.264/H.265 encoding
• Fast, stable autofocus and 2D/3D noise reduction
• Silent step-driving PTZ motor mechanism
• VISCA, IP VISCA, PELCO-D/P and ONVIF control, web client and IR remote
• 255 presets, RS-232 cascade, low-power sleep mode
• 3.5 mm stereo audio input

Notes

• Not compatible with the Blackmagic Design ATEM Television Studio HD at 1080p60; compatible with other switchers such as ATEM Mini and ATEM Mini Pro

In the box

• 1 x OTTICA PTZ camera
• 1 x Lens cap
• 1 x Power adapter
• 1 x RS-232 cable
• 1 x IR remote controller
• 1 x Wall mounting bracket with mounting screws
• 1 x RS-485 connector
• 1 x Cascade cable
• 1 x User manual

Specifications

• Lens: 4.3-129 mm, 30x optical zoom, F1.6-F4.7, viewing angle 2.34° to 65.1°
• Sensor: 1/2.8" HD CMOS, 2.07 megapixel, 16:9
• Video: 1920 x 1080 up to 60p; H.264, H.265
• Outputs: HDMI, 3G-SDI, LAN (NDI|HX); network protocols RTSP, RTMP, ONVIF
• Audio: 3.5 mm stereo line input; AAC, MP3, G.711A
• Control: RS-232 (in/out), RS-485; VISCA, IP VISCA, PELCO-D, PELCO-P, ONVIF
• Pan: ±170°, up to 60°/s
• Presets: 255 (10 with IR remote)
• White balance: auto, manual, one push, 2400 to 7100 K
• Power: PoE (802.3af) or 12 V DC, 12 W max
• Operating temperature: -10 to 50 °C
• Weight: 2.49 lb (1.13 kg)
• Colour: black