Ikan International PT4500S-PEDESTAL-TK-V2 15" 3G-SDI Teleprompter w/ Tally, Pedestal & Dolly Turnkey w/ Travel Case

Ikan 15" 3G-SDI Teleprompter with Tally, Pedestal & Dolly Turnkey with Travel Case PT4500S-PEDESTAL-TK-V2

The Ikan PT4500S-PEDESTAL-TK-V2 turnkey broadcast solution combines a 15" teleprompter, a pneumatic pedestal with fluid head and a dolly for studios, live events and virtual productions. The teleprompter travels in a rolling hard case. All systems are tested by Ikan for payload compatibility: with the full teleprompter system mounted (without counterweight) it accommodates camera setups up to 17 lb (7.7 kg), or 11.1 lb (5 kg) with the counterweight.

The lightweight aluminium teleprompter of Ikan's 4th generation series has several 3/8"-16 and 1/4"-20 mounting points and a 15" 4:3 1000 nit monitor with 3G-SDI, HDMI and VGA inputs; the American made 70/30 glass is readable from up to 17 ft (5.18 m). A rail allows the whole setup to be offset by up to 7" for balancing, and four camera riser plates plus a counterweight accept a wide range of cameras. The monitor has a built-in tally light that receives the tally signal over an Ethernet (RJ45) cable and lights up when the camera is live or recording.

The pneumatic pedestal has an air-assist centre column for effortless height adjustments, aluminium legs and a spreader; on its own (without teleprompter and head) it supports up to 44 lb (20 kg), with a 12.6" (32 cm) on-shot stroke. The 100 mm fluid head has separate pan and tilt locks, 8-step counterbalance and two pan handles suitable for zoom, focus and iris controls, and the heavy-duty dolly (132 lb / 60 kg) has height-adjustable cable guards.

Key features

• 15" 1000 nit teleprompter monitor with 3G-SDI, HDMI and VGA inputs
• Built-in tally light, RJ45 tally input
• American made 70/30 beam splitter glass, reading range 17 ft (5.18 m)
• Pneumatic pedestal with air-assist centre column and 100 mm fluid head
• Dolly with height-adjustable cable guards
• Four camera riser plates and counterweight
• PrompterPro 4 software for Mac and PC included
• Hard travel case

In the box

• Pneumatic pedestal with fluid head
• Dolly with wheels and cable guards
• 15" SDI teleprompter system with monitor
• 4 camera riser plates
• PrompterPro software
• Hard case for the teleprompter
• Carrying bag

Specifications

• Camera payload: up to 17 lb / 7.7 kg (without counterweight)
• Camera payload with counterweight: 11.1 lb / 5 kg
• Full system height: 1.50 to 2.31 m
• Pedestal height range: 102 to 184.5 cm, payload 44 lb / 20 kg
• Teleprompter monitor: 15", 4:3, 1280 x 1024, 1000 cd/m², VESA 100, 12 V DC, 28 W
• Rods: 15 mm x 400 mm carbon fibre; chassis: anodised aluminium
• Riser plate heights: 52.5, 95, 135 and 160 mm
• Fluid head: 100 mm bowl, payload 44.1 lb / 20 kg, tilt -60°/+90°
• Dolly: payload 132.3 lb / 60 kg, lockable wheels