Magewell Pro Convert for NDI to AIO Modator NDI decoder module for rack chassis

Magewell Pro Convert for NDI to AIO Module

The Magewell Pro Convert for NDI to AIO Module decodes a live NDI stream to HDMI and SDI at the same time, with very low latency. It decodes NDI High Bandwidth and NDI HX, HX2 and HX3 sources up to 2Kp60, as well as H.264/H.265 streams over RTSP, HTTP, HLS, RTMP (pull/push), MPEG-TS over UDP/SRT/RTP and TVU, and delivers them up to 1920x1080 60 fps on an HDMI 1.4 output and a 3G-SDI output with 8-channel 48 kHz audio and CEA-608/708 captions on SDI.

Like all Modator modules it is hot-swappable and centrally manageable through the Modator chassis touchscreen and Web UI or through Magewell Control Hub, while its own Web UI shows the decoded signal in real time and lets you set OSD, deinterlacing, resolution, audio gain, sample rate, channel mapping and network connection.

Key features

• Decodes NDI High Bandwidth, NDI HX, HX2 and HX3 up to 2Kp60
• Also decodes RTSP, HTTP, HLS, RTMP pull/push, MPEG-TS over UDP/SRT/RTP and TVU streams
• SpeedHQ/H.264/H.265 video and AAC/MP3 audio decoding
• Simultaneous HDMI 1.4 and 3G-SDI outputs up to 1920x1080p60
• Native CEA-608 and 608-over-708 captions on SDI; 3G-SDI over more than 150 m
• 48 kHz 8-channel audio output
• NDI 6.3
• Discovers NDI sources across network segments
• Very low latency
• Image flip for inverted projector installations and safe area controls
• Configuration from the Modator touchscreen, Web UI or Magewell Control Hub; HTTP APIs

Compatibility

• Magewell Modator 2U chassis (required)
• Magewell Control Hub for remote centralized management
• Crestron plugins (SIMPL+ modules) for Pro Convert decoders available from Magewell

Notes

• Modator module: it is installed in a slot of the Magewell Modator 2U rack chassis (sold separately), which supplies power (up to 20 W per slot) and centralized cooling. The interface list of the module includes no separate power input.
• Each module must be connected with its own Ethernet cable and its own signal cables; the Ethernet port of the chassis is only used to configure the chassis.
• Hot-swappable: modules can be inserted or removed while the chassis is running. Up to 10 modules of any type can be mixed in one Modator 2U.
• Magewell also offers the standalone version of the same specification (Pro Convert for NDI to AIO).

In the box

• Pro Convert for NDI to AIO Module x1

Specifications

• Interfaces: 1 x RJ45 1000 Mbps Ethernet, 1 x USB Type-C (configuration), 1 x SDI output, 1 x HDMI 1.4 output, 1 x Modator interface (hot-swappable)
• SDI output formats: 1920x1080p up to 60, 1920x1080i 50/59.94/60, 1280x720p up to 60, 720x576p50/i50, 720x480i59.94; SD (ST 259), HD (ST 292), 3G-SDI (ST 425, incl. DL and DS); YUV BT.601/709
• Indicator: decode status
• Web UI with USB RNDIS/ECM; HTTP APIs
• Max power consumption: 5.2 W
• Weight: approx. 300 g
• Form factor: 184.4 mm (L) x 30.0 mm (W) x 81.5 mm (H)
• Operating temperature: 0 to 50 °C
• Storage temperature: -20 to 70 °C
• Relative humidity: 5% to 90% non-condensing