SmallRig Wireless Receiver Motor 3263

SmallRig Wireless Receiver Motor 3263

The SmallRig Wireless Receiver Motor 3263 is part of the SmallRig wireless follow focus system. It has an ultra-low-power 0.52" OLED screen, accepts 5-16.8 V input with fast charging and delivers 0.5 N·m torque, with a 9 V/18 W output. It can be powered by the Battery Plate 3777 with NP-F batteries, or from V-mount batteries via the D-Tap to USB-C cable 3266 or the DC to USB-C cable 3268. The open-ended clamp fits 15mm rods and avoids obstacles; with the Multi-Functional Wireless Handgrip 3917 it allows precise focus pulling in handheld and shoulder setups. Via control cables (3325, 2971 or 2970 depending on the camera) it also triggers REC start/stop, and in cabled mode the latency is about 5 ms.

Key features

• 0.5 N·m peak torque
• 0.52" OLED screen
• 5-16.8 V wide input voltage and fast charging
• Quick-release open-ended 15mm rod clamp
• Wireless REC start/stop via control cable
• About 5 ms latency in cabled mode

Compatibility

• Photo and cine lenses from 49 to 114 mm diameter
• 15mm rod support systems
• Lens gear rings with M0.8 pitch
• SmallRig wireless follow focus system only

Notes

• The motor and the handwheel controller must be set to the same frequency band and number.
• Calibration is required if the motor reverses rapidly or the handwheel shows abnormal position information.

In the box

• Wireless Receiver Motor x 1

Specifications

• Dimensions: 108.2 x 50.1 x 32.1 mm
• Weight: 117 g
• Material: AL6061 aluminium